HONGYANG GROUP Swaziland Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP Swaziland Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

D-GC88 FUEL DISPENSER

D-GC88

D-GC88 FUEL DISPENSER

Pump :Type Optional

Inlet Pressure :>=54kPa.

Flow rate (L/min.): 55±5

Suction Distance (m) :6(verticalmente) / 50(orizzontalmente)

FlowMeter Type : Optional

Accuracy :±0.2%

Motor Voltage(V): 110V/220V/380V,50Hz/60Hz

Capacity(hp) :1HP(0.75kw)

Input Voltage : 110V/220V/380V,50Hz/60Hz

Nozzle :Auto Shut-off Nozzle

Environmental Condition : -40~~+55degree

Control Type :Solenold Vale Control Type

Preset :Function Provided(Small LCDIndicator)

Display(Counter) :Type LCD and Bright Backlight

Digit of Volume : 0~~999,999(6 Digits),Decimal point can be changed

Digit of Amount :0~~999,999(6 Digits),Decimal point can be changed

Digit of Unit price: 0~~9999(4 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Optional Display :Type LCD and Bright Backlight

Digit of Volume :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Amount :0~~99,999,999(8 Digits),Decimal point can be changed

Digit of Unit price : 0~~999999(6 Digits),Decimal point can be changed

Digit of Total Range : 0~~99,999,999,99

Totalizer: 1~~9,999,999

Hose :4.5m

Weight :450kg

Dimension(L×W×H): 1615 X 620 X2420(mm)

Dimension(L×W×H)Of Qty of Container :40ft: 26

products links

links

technical archives

    is provided for maintenance. Check floater. Disconnect upper cover, check ball floater and returned oil floater and find whe fuel dispenser ther oil flow into floater. Ball floater is made of two brass bowls through welting each other. If welding line exists defect it is easy that oil flow into. It is suggested to change a floater or weld the broken. Putting repaired floater int fuel dispenser o water more than 80 degree, if found no foam at welding line the repaired one could continue to be used. Some manufacturers replace ball floater, returned oil buoy and exhausting valve seat with ball valve subassembly. Adopting Oil-resistant plastic substitute thin brass board to make returned oil floater. Suggesting change a new floater as found any abnormal transformation of floater. Inspect returned oil valve. There are two situations exhausting pipe leakage caused by the returned oil valve. One situation is that returned oil valve is cemented due to extensive oil. In this case it is suggested to clean valve and reassemble it. Another situation appears because the returned oil valve is stuck. Taking away burr or waste on leader and reassemble it reference to Diagram 2-13. 3.3 No delivery or inefficient discharge caused by vapor separator Examine filter. A blocked filter not only affects fuel the suction capacity, but also generates abnormal noise. It is suggested to clean and reassemble filter. Don’t use brush to clean metal net so as not to increase net hole and affect filter accuracy. Inspect check valve. If check valve is stuck fuel dispenser can’t discharge any oil. The method to solve the problem is to clean waste after disconnecting spring seat, spring and check valve, and reassemble it. Make sure that the movement of che fuel dispenser ck valve is agile. Inspect the leakage between tank and fuel dispensers. The inspection is conducted with filter check. If no oil or oil level go down slowly in low pressures chamber, there must leakage in bottom valve or pipeline. If there is still leakage occurred after solve above problem, carefully examine

technical specification

    ipement (D5030)   Format: BCD1   Tag: DF D3 A6   Domaine: toutes cartes   Codage: nombr fuel dispenser e des applications actives   13.3.1.32.Num ro de distributeur (D5031)   Format: BCD1   Tag: DF D3 A7   Domaine: cartes privatives  All right reserved � Imprim le 21020 fuel dispenser 3 13:02 89138   MPA V5.2: SPECIFICATIONS Ref : NT1118R5   TECHNIQUES Nb Pages : 138 + 0 PJ   de la LIAISON AUTOMATE-MONETIQUE Date :  POS Department   Note : permet de d finir le distributeur utilis (ne pr sente d int r �que si l automate est de   type borne)   13.3.1.33.Code chauffeur (D5032)   Format: C4   Tag: DF D3 A8   Domaine: cartes privatives   Codage: ASCII (non crypt )   13.3.1.34.Num ro de version Param ╰res sp cifiques applications (D5033)   Format: C4   Tag: DF D3 A9   Domaine: cartes privatives   Codage: ASCII   Note: Inutilis . Ce sont les num ros de version de param ╰res propres aux diff rentes cartes ?   piste qui sont utilis s.   13.3.1.35.Num ro de point de distribution (D5034)   Format: BCD1   Tag: DF D3 AA   Domaine: cartes privatives   Codage: 1 ?99   13.3.1.36.Num ro de pistolet sur un point de distribution (D5035)   Format: BCD1   Tag: DF D3 AB   Domaine: ca fuel dispenser rtes privatives   Codage: 1 ?6   13.3.1.37.Modulo de la clef publique de cryptage des codes confidentiels (D5036)   Format: Ox   Tag: DF D3 AC   Domaine: cartes privatives dont le

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    Letters Leaders fuel dispenser Face value Letters On philanthropy, American expatriates, Haiti, Surfing the airwaves department stores, se fuel dispenser eds, political fashions WORLD Special Report United States Special Report The Americas Asia Economic models Middle East & Africa Russia Big questions and big numbers Europe Richer, bolder—and sliding back Britain Country Briefings Finance & Economics Cities Guide United States Global markets SURVEYS Tightening the reins The budget And the money comes pouring in BUSINESS Rating agencies Management Reading fuel dispenser Downgraded Immigration Business Education The wrong side of history Executive Dialogue