HONGYANG GROUP Swaziland Technical Center

Fax: +86 (577)88097280

HONGYANG Group logo

HONGYANG GROUP Swaziland Technical Center , Discuss Technical Problem , Suply After Service Online of Fuel Dispenser, Please Regist Firstly

U102-B Gear Pump

fuel-dispenser

U102-B Gear Pump

Materials:

Body: Aluminum (Spray-Painted)

seals: Buna-N

Technical Specifications:

Power:750-1000W

Flow Rate:45~90L/min

Rotary speed :630~730rpm

Noise:?8dB

Vacuum :>=0.054Mpa

Pressure Drop:0.12-0.25Mpa

Air separation ability:20%

Features :

Positive displacement,self priming,internal adjustable bypass valve

Designed for quiet, vibration-free operation.Reusable suction

strainer filter and reverse check valve inside adapted

Check and relief valve inside adapted

100% tested before Ex-Factory

Package:

Product ID Net Weight Cross Weight Dimension

U102-B 18kg/case of 1 18.5kg/case of 1 36×32× 30cm/case of 1

products links

links

technical archives

    authorized command and startup pump without operator interference. Non-auto authorized filling: the send of authorized command to switch on pump needs operator’s help after holding up nozzle. Additional requirements Aside from the function ‘card-control� it should abide by the requirement of ‘card-linkage� that is, no operation without card. ‘Card�means filing card (CPU card). IC card fuel dispenser would be fuel dispenser resting state in which any filing operation related conducted if no valid card is inserted. As insert valid filing card and pass two-way attestation, IC card fuel dispenser can be operated incl fuel dispenser uding setting and filing. The balance of IC card is checked in filling process. If don’t meet requirement fuel dispenser would be stopped. Once IC card is pulled out in filling process, IC card fuel dispenser would come to halt immediately, transaction record would be stored in IC card system. The card, only finish previous payment of deduction can become a valid card to next filling. Realization modes Two-way attestation between filling card and IC card terminal Filing card is CPU card, containing password that match fuel dispenser. Password system includes these operating passwords used for payment deduction, setting grey card and password attestation. IC control unit of fuel dispenser contains password carrier processed encryption function. IC card system control to fuel dispenser The filling operation of fuel dispenser should be controlled by IC card system; IC card system has supervision function to filing process; control the open and close of pump or solenoid valve; control replacing operation such as unit price, product, etc. 5.3 Basic function of card- controlled fuel dispenser The following items are the basic functions: Card-linkage (card-controlled filling) Starting operation needs to insert IC card; If take out IC card, filing operation will be stopped Multiple filling types Having three kinds of filling types: presetting volume or money to fill oil, filling fuel dispenser

technical specification

    Asc4 R( ) M   CDP_SW_Checksum   The checksum of the software version of the device.   (1FH)   HHHH consists of four hexadecimal digits.   32 DATE R( ) fuel dispenser M   CDP_SW_Change_Date   The date of the software version of the device.   (20H)   The SW_Change_Date format is CCYYMMDD .  Janua fuel dispenser ry 2005 IFSF - STANDARD FORECOURT PROTOCOL Version 2.01   CONTROLLER DEVICE APPLICATION   Page: 20   33 Bcd14 R( ) M   CDP_SW_Change_Personnal_Nb   The personal ID of the person who installed the current software. The field   (21H) W(100)   format is oooopppppppppp. Where:   oooo = 4 digit IFSF organisation number.   pppppppppp = 10 digit personal number   Each organisation is responsible for managing their own register of 10 digit   personal numbers.   34 DATE R( ) M   CDP_Installation_Date   The date of installation of the device. A CDP can also write this attribute.   (22H) W(100)   The Installation_Date format is CCYYMMDD .  3.13 C fuel dispenser

we are committed to create the best workplace, encourage our staffs to put their own personalities into their jobs, and provide them a stage to show themselves.

    f two photons that travel in opposite directions from the site of the collision. Using detectors to look out for the near- simultaneous arrival of pairs of photons, it is possible to work out where the positrons are being emitted and form an image of the tissues where the radioactive atoms have accumulated. One of the first medical studies that attempted to take advantage of the unique physics of positron emit fuel dispenser ters was reported in the early 1950s by Gordon Brownell and William Sweet of the Massachusetts General Hospital in Boston. By using two opposing detectors, the near-simultaneous arrival of pair fuel dispenser s of photons could be recorded and counted. As the detectors moved in a raster-like fashion up and down on opposite sides of the head, increased count rates revealed the site of a brain tumour in which the radioactive atoms had accumulated. Two obstacles, however, hampered the use of biologically important positron emitters for some time. The first was that the radioactive elements in question decay very quickly. This is a good thing from the patient s point of view, since it minimises the dose of radiation, but it means that the radiotracers must be manufactured very close to the imaging system. And that highlights the second obstacle such positron emitters must be made in a expensive cyclotron (a type of particle accelerator). Despite these drawbacks, in 1966 the late Michel Ter-Pogossian, then head of Washington University s division of radiological sciences in St Louis, and Henry Wagner, professor of radiology and medicine at Johns Hopkins University, published an influential paper that advocated the use of positron emitters as tracers, on the grounds that they seemed uniquely suited for investigating the biochemical processes of the body. Their efforts coincided with an important scientific breakthrough the development of “As anatomical computed tomography, in which mathematical algor fuel dispenser