U312 Automatic Nozzle

U312 Automatic Nozzle

U312 series automatic nozzles are designed with today's customer in mind. Small, trim, light weight, easy and convenient to operate, the is a rugged performer that offers long life and reliable service.

Warning

Use foreign objects to hold open automatic nozzles could result in failure to shut-off and personal injury.

Materials:

Body: Aluminum

seals: Buna-N, Viton

Main stem seals: Viton Cased Oil Seal / Graphite with Teflon

Main stem: Stainless steel

Color of insulator :

Red Green Blue Yellow Black

Features :

U312-B/D/F Flow rate: 0-60 L/m (15/16")

U312-A/C/E Flow rate: 0-45 L/m (13/16")

Working Pressure: 0.18Mpa

U312 Automatic Nozzles-or diesel, kerosene and all kinds of gasoline service

Easily replaced spout- simply remove the screw.

Spout kits are available from HONGYANG.

Low profile aluminum body- light weight, easier to handle, provides an attractive, image enhancing appearance.

Hold-open rack is available for full service applications.

The one hand control means easy setting to flow rate for customer's convenience.

Full hand insulator- protects both nozzle and vehicle, and insulates users' hands.

Vacuum Design: Side-Sealing Design.

Selective casting process of body- low-pressure casting technique or high-pressure casting technique.

The high-pressure casting technique can reduce diesel foaming and static electricity.

100% Factory Tested.

Available Colors- color chart on inside back cover Selective splash guard.

Replacement Parts:

Key Description

1 Spout 13/16" & Spout 15/16"

2 Full hand insulator

3 Main Valve Assembly

4 Lever

5 Ratchet Pin

6 Diaphragm assembly

Package:

Net Weight Cross Weight Dimension

18.75kg/case of 15

12.25kg/case of 10 22kg/case of 15

15kg/case of 10 55x34x42.5cm/case of 15

37.5x34x43cm/case of 10

Important:

The products should be used in compliance with applicable country, province and local Laws and regulations. Products selection should be based on physical Specifications and limitations and compatibility with the environmentand materials to be handled. HONGYANG makes no warranty of fitness for a particular use. All illustrations and Specifications in this literature are based on the latest products information available at the time of publication,HONGYANG reserves the right to make changes at any time in price, materials. Specifications and models and to discontinue models without notice or obligation.

result during approval progress. The other is to make adjustment as temperature fluctuate 20 degree. Stopwatch, minimum value 0.1 second, is used for measuring how long a certain volume medium discharge out of fuel dispenser so as to calculate its flow rate. Gradienter, precision being 0.05mm/m, measures the d fuel dispenser egree of level. Article III Indicating appraisal method and data processing Appraisal of fuel dispenser actually is an indicating access. Presently, cubage compare method is mostly used defining basic tolerance between the volumes flow over flow meter and in metal standard measurer. Diagram 6-2 is illustrated the fuel dispenser’s appraisal flow. 1: Check valve 2: Pump 3: Vapor separator 4: Flow meter 5: Indicating device 6: Hose 7: Nozzle 8: Standard measurer 9: Measurer 10: Switch & zeroing 11: Container 12: Moto fuel dispenser r 13: Tank 14: Filter net Diagram 6-2: Appraisal of fuel dispenser fuel dispenser using metal standard measurer Preparation before appraisal Place metal standard measurer on the hard ground and adjust with gradienter. It also put on vehicle or other bracket, as long as not waving or vibration during appraisal progress. Metal standard measurer should be earthing- connected. It is suggested to connect the measurer to ground terminal of fuel dispenser, making them being same potential. Running-in and wet measurer. Putting indicator device at zero, open nozzle and observe oil indicator. Oil is transparent as there is no foam in it. If have foam or bubble oil would be feculent and opaque. If foam exists in oil for a long time, fuel dispenser would have trouble. Appraise again after solving failure. Close nozzle as measurer full of oil. Empty measurer in accordance with relative method and time, and shut off bottom valve, putting measurer in preparation state. Appraisal procedure of indicating valve Set unit price; Adjust flow to the maximum Qmax; Wet measurer and place it according to regulation; Tune indicator finger to zero position; Infuse measurer as preset volume, measure outlet t

and　　 write this Data_Id as if the functionality were supported.　　March 2006 IFSF - STANDARD FORECOURT PROTOCOL FP31_2.23　　 DISPENSER APPLICATION　　 fuel dispenser Page: 67　　 CALCULATOR DATABASE　　 DB_Ad = C_DAT (01H)　　 Data Field Type ReadWrite MO　　 Data Element Name　　 Description　　 _Id (Values) in State　　 22 fuel dispenser Bin8 R(1-9) M　　 Mi fuel dispenser n_Fuelling_Vol　　 (16H) (0-255) W(1-2)　　 Specifies the minimum volume in millilitres required　　 before the transaction can be considered as having　　 started (the FP status should change from STARTED to　　 FUELLING).　　 0 = the FP state moves directly to FUELLING　　 Please note that dispensers that do not permit this Data_Id　　 to be changed remotely should:　　 0 Reject any write attempts with a Data_ACK value of　　 2 (Read OnlyNot Writable).　　 1 Must set the Data_Id to the hardcoded value.　　 When a master resetcold start occurs on the dispenser　　 device the dispenser should reset this Data_Id to its　　 default value.　　 PCD Comment:　　 Where the proprietary pump connected to the PCD can　　 not support this volume limit directly the PCD will have to　　 try to implement its own mechanism to

emperance movement of surprising force has banished smokers from offices, restaurants and bars in a lengthening list of countries. This year, even Spain banned smoking in workplaces. The anti-smoking leagues stay on the right side of Mill by invoking the dangers of passive smoking. The true extent of th fuel dispenser ose dangers is a matter of some uncertainty. But they represent a classic externality—an uncompensated, unpriced harm the smoker inflicts on others—which can justify quite draconian measures even in a liberal s eyes. Some of the new paternalists, however, justify smoking restrictions on less orthodox grounds. Just as one individual can inflict an externality on another, so one side of a person s nature can inflict an “internality�on another. The self who enjoys a cigarette takes too little account of the damage he in fuel dispenser flicts on the lungs of his future self, nor the addit fuel dispenser ion each cigarette makes to the strength of his addiction. Jonathan Gruber of the Massachusetts Institute of Technology, and Botond Koszegi of the University of California, Berkeley, think these “internalities�justify additional “sin taxes�on cigarettes and alcohol. Such taxes are not, they claim, unfair to the poor, who spend a greater share of their income on cigarettes. Since the poor are more sensitive to prices than the rich, higher tobacco taxes are of greater help to them in their efforts to quit. Taking this into account, cigarette taxes are probably “progressive� the two economists conclude. Messrs O Donoghue and Rabin, on the other hand, suggest sin licences. Rather than charge a duty of $2 a packet, governments could make the sale of cigarettes illegal to anyone who did not buy a smokers ID, which might cost $5,000 and entitle the holder to 2,500 packets of cigarettes tax- free. People would no longer be able to slide into a smoking habit one packet at a time. It would be clear from the outset that they were entering a lifelong marriage to nicotine. If such a high price is too crude